Presentations

Presentations2022-03-23T11:23:40+08:00

2020

  1. C. Venkatesan, N. Vaheed, T.E. Tay, A. Silva, “Experimental investigation on the mechanical performance of thermoplastic composite manufactured with IR based automated fibre placement”, The 23rd International conference on composite structures & 6th International Conference on Mechanics of Composites (ICCS23 & MECHCOMP6), 2020, Porto, Portugal, September 1-4, 2020.
  2. David Rosen, “Active Transdisciplinary Engineering Education for Competence Development in an Intelligent Manufacturing Era” (Keynote presentation), International Conference on Active Learning in Engineering Education (PAEE/ALE 2020), Thailand, August 26-28, 2020.
  3. T.V. Truong, R.C. Mysa, T. Stalin, P.M. Aby Raj, and P. Valdivia y Alvarado, “Development of a Maneuverable Un-Tethered Multi-n Soft Robot”, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Las Vegas, NV, USA, October 25 – 29, 2020.
  4. S. Jain, T. Stalin, V. Subramaniam, J. Agarwal, and P. Valdivia Y Alvarado, “A Soft Gripper with Retractable Nails for Advanced Grasping and Manipulation”, IEEE International Conference on Robotics and Automation (ICRA), Paris, France, May 31 – August 31, 2020.
  5. S. Jain, T. Stalin, E. Kanhere, and P. Valdivia y Alvarado, “Flexible Fiber Interconnects For Soft Mechatronics”, IEEE International Conference on Soft Robotics (RoboSoft), Yale University, USA, May 15 – July 15, 2020.
  6. David Rosen, “Multi-scale Topology Optimization for Additive Manufacturing”, International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM) 2020, South Korea, November 16-18, 2020.
  7. Gao Hongwei, “High-resolution polymer waveguide devices fabricated using three-dimensional multiphoton lithography”,14th Pacific Rim Conference on Lasers and Electro-Optics (CLEO Pacific Rim, CLEO PR 2020), Melbourne, Australia, August 3 – 5, 2020.
  8. A. G. Dharmawan, Y. Xiong, S. H. Foong, G. S. Soh, “A Model-Based Reinforcement Learning and Correction Framework for the Process Control of Robotic Wire Arc Additive Manufacturing”, International Conference on Robotics and Automation (ICRA), Paris, France, May 31 – August 31, 2020.
  9. Xi Yu Oh, Gim Song Soh, “A Study on the Machine Learning Frameworks for the Geometric Modelling of Wire Arc Beads Profile”, IDETC-CIE – International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 17 – 19, 2020.
  10. Kenneth Tracy, Loo Yi Ning Stella, Sachin Gupta, Christine Yogiaman, “Soft Mechatronic, Aerodynamic Architecture Studio” The ACSA108 Annual Meeting | OPEN, American Collegiate Schools of Architecture, United States of America, California, March 12-14, 2020.
  11. Kenneth Tracy, Loo Yi Ning Stella, Sachin Gupta, Christine Yogiaman, “Hygro-Compliant: Responsive Architecture with Passively Actuated Compliant Mechanisms”, 25th Computer-Aided Architectural Design Research in Asia (CAADRIA 2020), Faculty of Architecture Chulalongkorn University, Thailand, Bangkok, April 7-10, 2020.

2019

  1. Yang Hui Ying,”3D Printed Energy Storage Devices”, Energy and Environmental Materials (EEM) 2020, Griffith University, Australia, February 8, 2020.
  2. Dhileep Kumar Jayashankar, Sachin Sean Gupta, Loo Yi Ning Stella, Kenneth Tracy, “3D Printing of Compliant Passively Actuated 4D Structures”, Solid Freeform Fabrication Symposium, Austin, United States, August 12-14, 2019.
  3. Raghu, N., Kim, S., Rosen, D.W., “A Characterization Method for Mechanical Properties of Metal Powder Bed Fusion Parts”, 40th International MATADOR Conference, Hangzhou, China, July 8-10, 2019.
  4. Rosen, DW, Hassani, V, Goh, E, Sarwan, S, Doetzer, F, “A Design Method to Exploit Synergies Between Fiber-Reinforced Composites and Additive Manufactured Processes”, Solid Freeform Fabrication Symposium, Austin, United States, August 12-14, 2019.
  5. Tang, Y., Xiong, X., Rosen, D.W., “A universal material template for multiscale design and modeling of additive manufacturing processes”, Solid Freeform Fabrication Symposium, Austin, United States, August 12-14, 2019.
  6. Emami, M., Rosen, D.W., “A universal material template for multiscale design and modeling of additive manufacturing processes”, International Conference on Simulation for Additive Manufacturing, Pavia, Italy, September 11-13, 2019.
  7. Wei Huang Goh and Michinao Hashimoto, “A Water-Resilient Composite for Sacrificial Molding in Hydrogels”, The International Conference on Materials for Advanced Technologies (ICMAT) 2019, Singapore, June 23-28, 2019.
  8. F. Lam, Y. Xiong, A. G. Dharmawan, S. H. Foong, G. S. Soh, “Adaptive Process Control Implementation of Wire Arc Additive Manufacturing for Thin Wall Components with Overhanging Features”, 40th International MATADOR Conference, Hangzhou, China, July 8-10, 2019.
  9. Yi-Dan Chen, Wenshen Zhou, Wenwei Yu, Shao Ying Huang, “Aerosol jet printing of conductive patterns on paper substrate”, 2020 IEEE International Conference on Computation, Singapore, March 25 -27, 2020
  10. Stalin; N.K. Thanigaivel; V.S. Joseph; P. Valdiviay Alvarado, “Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components”, 2nd IEEE International Conference on Soft Robotics (RoboSoft), Seoul, South Korea, April 14 – 18, 2019.
  11. Sachin Sean Gupta, Dhileep Kumar Jayashankar, Kenneth Tracy, “Biomaterial Activated Responsive Truss Systems”, Institute for Advanced Architecture of Catalonia (IAAC) Responsive Cities Symposium – Disrupting through Circular Design, Spain, Barcelona, November 15, 2019.
  12. Rahul Karyappa and Michinao Hashimoto, “Chocolate Ink 3D Printing (Ci3DP) At Ambient Conditions”, The International Conference on Materials for Advanced Technologies (ICMAT) 2019, Singapore, June 23-28, 2019.
  13. P Xing, D. Ma, K. J. A. Ooi, J. W. Choi, A. M. Agarwal, and D. T. H. Tan, “Compact and low loss silicon carbide waveguide with high nonlinearity based on CMOS-compatible platform”, Hawaii, United States, July 15 – 19, 2019.
  14. Xiong, Y, Dharmawan, AG, Tang, Y, Soh, GS, Rosen, DW, “Computer-aided Process Planning for Wire Arc Directed Energy Deposition”, Solid Freeform Fabrication Symposium, Austin, United States, August 12-14, 2019.
  15. Tien Van Truong, Vinoth Kumar Viswanathan, Vincent Joseph, Pablo Valdivia y Alvarado, “Design and Characterization of a Fully Autonomous Under-Actuated Soft Batoid-Like Robot”, IEEE/RSJ International Conference on Intelligent Robots and Systems 2019, Macau, China, November 4 – 8, 2019.
  16. Park S-I., Tang Y., Xiong Y, Rosen D.W., “Design for 4D Printing by Enabling Eigenstrains”, 56th Meeting of the Society of Engineering Science, Missouri, United States, October 13 – 15, 2019.
  17. Rosen, D.W., “Design for Additive Manufacturing: Opportunities and Challenges”, Keynote talk at 16th Annual International CAD Conference (CAD’19), Singapore, June 24-26, 2019.
  18. Rosen, D.W., “Design for Additive Manufacturing: Opportunities and Challenges”, International Mechanical Engineering Congress and Exhibition, Utah, United States, November 13, 2019.
  19. Kim, S., Tang, Y., Rosen, D.W., “Design for additive manufacturing: Simplification of product architecture by part consolidation for the lifecycle”, Solid Freeform Fabrication Symposium, Austin, United States, August 12-14, 2019.
  20. G. Dharmawan Y. Xiong S. H. Foong and G. S. Soh, “Development of an Automated and Adaptive System for Robotic Hybrid-Wire Arc Additive Manufacturing (H-WAAM)”, IFToMM International Symposium on Robotics and Mechatronics, Taipei, Taiwan, October 28 – 30, 2019.
  21. Park, S-I., Xiong, Y., Tang, Y., Rosen, D.W., “Development of Implicit CAD System for Multi-material Additive Manufacturing”, Solid Freeform Fabrication Symposium, Austin, United States, August 12-14, 2019.
  22. Wei Huang Goh and Michinao Hashimoto, “Dual Sacrificial Molding: 3D Printing of Dual Materials to Create 3D Microchannels With Free Hanging Geometries”, 2019 MRS Spring Meeting & Exhibit, Phoenix, Arizona, April 22-26, 2019.
  23. Sachin Sean Gupta, Dhileep Kumar Jayashankar, Kenneth Tracy, “Dynamic Space Truss Membrane Assemblies”, 60th Anniversary Symposium of the International Association for Shell and Spatial Structures – IASS 2019 (Structural Membranes), Spain, Barcelona, October 7, 2019.
  24. Azusa Shimizu, Wei Huang Goh, Michinao Hashimoto, Sigenori Miura, Hiroaki Onoe, “ECM-Based Microfluidic Stretchable System For In Vitro 3D Tissue Culture”, The 58th Annual Conference of Japanese Society for Medical and Biological Engineering, Okinawa, Japan, June 6-8, 2019.
  25. Azusa Shimizu, Wei Huang Goh, Michinao Hashimoto, Shigenori Miura, and Hiroaki Onoe, “ECM-Based Stretchable Microfluidic System For In Vitro 3d Tissue Culture”, 20th International Conference on Solid-State Sensors, Actuators and Microsystems & Eurosensors XXXIII (TRANSDUCERS & EUROSENSORS XXXIII), Berlin, Germany, June 23-27, 2019.
  26. Truong, T. V., V. S. Joseph, and Pablo Valdivia y Alvarado, “Effects of fin kinematics on 3D force generation in underwater large pectoral fin locomotion”, 9ᵗʰ International Symposium on Adaptive Motion of Animals and Machines (AMAM 2019), Switzerland, August 20-23, 2019.
  27. MC Tan, Y Wu, Z Wang, X Zhao, “Engineering Ag Particle Based Inks to Improve Electrical and Sensing Properties of Conductive Composites”, San Francisco, CA, United States, September 29 – October 2, 2019.
  28. Rajkumar Velu, Nahaad Vaheed, Murali Krishnan and Felix Raspall, “Evaluation of engineering high performance thermoplastics for robot-based 3D printing mould”, 40th International MATADOR Conference, Hangzhou, China, July 8-10, 2019.
  29. Chadurvedi Venkatesan, Rajkumar Velu, Nahaad Mohammed Vaheed, Felix Raspall, T.E Tay, Arlindo Silva, “Evaluation of influence Effect of layup speed on Polyamide-6 carbon prepreg by Automated fibre placement”, 40th International MATADOR Conference, Hangzhou, China, July 8-10, 2019.
  30. Rajkumar Velu, Nahaad Mohammed Vaheed, Chadurvedi Venkatesan, Felix Raspall, Murali Krishnan, “Experimental investigation of Automated fibre placement process using 3D printing substrate”, 2nd CIRP Conference on Composite Material Parts Manufacturing, University of Sheffield, England, October 10 – 11, 2019.
  31. Emami, M.M., Rosen, D.W., “Explanatory Multiphysics Modelling of Generated Heat in Vat Photopolymerization”, Solid Freeform Fabrication Symposium, Austin, United States, August 12-14, 2019.
  32. Wei Huang Goh and Michinao Hashimoto, “Fabrication Of 3D Microchannels In Castable Matrices by Modular Assembly and Direct Patterning of Sacrificial Mold Made with Polyvinyl Alcohol (PVA)”, The International Conference on Materials for Advanced Technologies (ICMAT) 2019, Singapore, June 23-28, 2019.
  33. Terry Ching, Rahul Karyappa, Akihiro Ohno, Yi-Chin Toh, Michinao Hashimoto, “Fabrication of Dynamically Tunable Droplet Microfluidics by Direct Ink Writing (DIW) 3D Printing”, The 9th International Multidisciplinary Conference on Optofluidics (IMCO2019), Hong Kong, June 14-17, 2019. Best Poster Award.
  34. Terry Ching; Kento Yamagishi; Toh Yi-Chin; Michinao Hashimoto, “Fabrication of Stretchable Microchannels By Direct Ink Writing (DIW) For Film-Based Soft Robotic Actuators”, The International Conference on Materials for Advanced Technologies (ICMAT) 2019, Singapore, June 23-28, 2019.
  35. Dhileep Kumar Jayashankar, Sachin Sean Gupta, Naresh D Sanandiya, Javier G. Fernandez, Kenneth Tracy, “Fibre Reinforced Composite Manufacturing for Passive Actuators”, 40th International MATADOR Conference, Hangzhou, China, July 8-10, 2019.
  36. Hassani, V., Khabazi, Z., Raspall, F., Banon, C., Rosen, D.W., “Form-Finding and Structural Shape Optimization of the Metal 3D-Printed Multi-Branch Node with Complex Geometry”, CAD Conference, Singapore, June 24-26, 2019. DOI: 10.14733/cadconfP.2019.24-28
  37. Calais, T. Stalin, V.S. Joseph, P. Valdivia y Alvarado, “Freeform Fabrication of Dielectric Elastomer Actuators for Soft Robotics Applications”, The International Conference on Materials for Advanced Technologies (ICMAT) 2019, Singapore, June 23-28, 2019.
  38. Theo Calais, Elgar Kanhere, Siddharth Kumar, Thileepan Stalin and Pablo Valdivia y Alvarado, “Freeform Fabrication of Dielectric Elastomer Actuators for Soft Robotics Applications”, 2019 MRS Fall Meeting & Exhibit, Boston, United States, December 1-6, 2019.
  39. Tang, Y, Xiong, Y, Park, S-I, Boddeti, GN, Rosen, DW, “Generation of Lattice Structures with Convolution Surface”, CAD Conference, Singapore, June 24-26, 2019. DOI: 10.14733/cadconfP.2019.69-74
  40. Kento Yamagishi, Wenshen Zhou, Terry Ching, Shaoying Huang, Michinao Hashimoto, “Highly stretchable and tissue-adhesive near-field-communication (NFC) patch devices”, The 17th International Conference on Biomedical Engineering (ICMBE), Singapore, December 9 – 12, 2019.
  41. Ge Q, “Highly Stretchable Hydrogels for UV Curing Based High- Resolution Multimaterial 3D Printing”, The International Conference on Materials for Advanced Technologies (ICMAT) 2019, Singapore, June 23-28, 2019.
  42. Sindhu Vijayan and Michinao Hashimoto, “Integration of Customizable Microfluidic Nozzles with Direct Ink Writing (DIW) 3D Printer”, The International Conference on Materials for Advanced Technologies (ICMAT) 2019, Singapore, June 23-28, 2019.
  43. Sachin Sean Gupta, Ying Yi Tan, Pei Zhi Chia, Christyasto P. Pambudi, Christine Yogiaman, Kenneth Tracy, “Knit Tensegrity Shell”, 60th Anniversary Symposium of the International Association for Shell and Spatial Structures – IASS 2019 (Structural Membranes), Spain, Barcelona, October 7-10, 2019.
  44. Jamshidian, M., Boddeti, N., Rosen, D.W., Weeger, O., “Large deformation response of 3D printed soft lattice structures using micromechanical finite element analysis”, International Conference on Simulation for Additive Manufacturing, Pavia, Italy, September 11-13, 2019.
  45. Xian, Y., Rosen, D.W., “Multi-material topology optimization with arbitrary volume constraints for additive manufacturing”, Solid Freeform Fabrication Symposium, Austin, United States, August 12-14, 2019.
  46. Huy Do, YingYi Tan, and Kenneth Tracy, and Oliver Weeger, “Multi-Scale Simulation and Optimization Framework for Graded, Functional Knitted Textiles”, 7th Asian Pacific Congress on Computational Mechanics (APCOM 2019), Taipei, Taiwan, December 17 -10, 2019.
  47. Hume, C, Rosen, DW, “Numerical Modeling and Evaluation of Material Jetting-Based Additive Manufacturing”, Solid Freeform Fabrication Symposium, Austin, United States, August 12-14, 2019.
  48. Huy Do, Oliver Weeger, Yu Han Quek, Nathalie Ramos, Josef Kiendl, and Kenneth Tracy, “Numerical Simulation of Mechanical Behavior of Knitted Textiles at Meso- and Macro- Scales”, 10th International Conference on Computational Methods (ICCM2019), Singapore, July 9-13, 2019.
  49. Wei Huang Goh and Michinao Hashimoto, “Overcoming Geometrical Constraints: Fabricating Free Hanging Microchannels By Dual Sacrificial Mold”, The 9th International Multidisciplinary Conference on Optofluidic (IMCO2019), June 14-17, 2019, Hong Kong. Best Paper Award.
  50. Wei Huang Goh and Michinao Hashimoto, “Patterning of Intricate In-Channel Features by Sacrificial Molding Of 3D Printed Mold”, The 14th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), April 11-14, 2019, Bangkok, Thailand.
  51. Atsushi Takano, Anik Islam, Kento Yamagishi, Michinao Hashimoto, “Pneumatic Networks (PneuNets) Actuator Controlled by Local Deformation Using a Soft Valve”, The 38th JSST Annual International Conference on Simulation Technology (JSST2019), Miyazaki, Japan, November 5-7, 2019.
  52. Sachin Sean Gupta, Dhileep Kumar Jayashankar, Naresh D Sanandiya, Javier G. Fernandez, Kenneth Tracy, “Prototyping Of Chitosan Based Shape Changing structures”, 24th Annual Conference on Computer Aided Architectural Design Research in  Asia – CAADRIA 2019 (Intelligent & Informed), Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), Wellington, New Zealand, April 15-18, 2019.
  53. Yuan C, Ge Q., “Recycling of Vitrimer Blends with Tunable Thermomechanical Properties”, The International Conference on Materials for Advanced Technologies (ICMAT) 2019, Singapore, June 23-28, 2019.
  54. Zhang, Z., Hua, B-S., Rosen, D.W., Yeung, S-K., “Rotation Invariant Convolutions for 3D Point Clouds Deep Learning”, International Conference on 3D Vision, Quebec, Canada, September 16-19, 2019.
  55. Zhiyuan Zhang, Binh-Son Hua, Sai-Kit Yeung, “ShellNet: Efficient Point Cloud Convolutional Neural Networks using Concentric Shells Statistics”, IEEE/CVF International Conference on Computer Vision (ICCV), South Korea, October 27 – November 2, 2019.
  56. Rahul Karyappa and Michinao Hashimoto, “Solvent-Assisted Direct Writing Of Polysiloxanes”, The International Conference on Materials for Advanced Technologies (ICMAT) 2019, Singapore, June 23-28, 2019.
  57. Terry Ching, Toh Yi-Chin, Michinao Hashimoto, “Stereolithography (SLA) 3D Printed Templates for Engineering Perfusable Biomimetic Vasculatures in Alginate Hydrogel”, The 23rd International Conference on Miniaturized Systems for Chemistry and Life Sciences (µTAS 2019), Basel, Switzerland, October 27 – 31, 2019.
  58. Terry Ching, Toh Yi-Chin, Michinao Hashimoto, “Stereolithography (SLA) 3D printed templates for engineering perfusable biomimetic vasculatures in alginate-gelatin hydrogel”, The 17th International Conference on Biomedical Engineering (ICMBE), Singapore, December 9 – 12, 2019.
  59. Terry Ching, Toh Yi-Chin, Michinao Hashimoto, “Strategies in Stereolithography 3D Printing of Complex Fluidic Networks”, The International Conference on Materials for Advanced Technologies (ICMAT) 2019, Singapore, June 23-28, 2019.
  60. Raju, N, Rosen, DW, “Study of Printing Direction, Post-Processing Effects on Mechanical and Material Properties of EOS MS1 Maraging Steel”, Solid Freeform Fabrication Symposium, Austin, United States, August 12-14, 2019.
  61. Hailong Liu, Weiling Dong, Hao Wang, Li Lu, Robert E. Simpson, Joel K.W. Yang, “Sub-diffraction rewritable laser printing with wide-bandgap phase change material in the visible range”, The 9th International Conference on Surface Plasmon Photonics (SPP9), Copenhagen, Denmark, May 26 – 31, 2019.
  62. Wang Qiang, Low Hong Yee, “Superhydrophobic Polymer Topography Design Assisted by Machine Learning Algorithms”, The 16th Pacific Polymer Conference, Singapore, December 8 – 12, 2019.
  63. Kento Yamagishi, Akihiro Nojiri, Eiji Iwase and Michinao Hashimoto, “Syringe-Injectable and Self-Expandable Nanofilms Consisting of Polyurethane-Based Shape Memory Polymers”, The 66th JSAP Spring Meeting 2019, Mar 9-12, 2019, Tokyo, Japan.
  64. Kento Yamagishi, Akihiro Nojiri, Eiji Iwase and Michinao Hashimoto, “Syringe-Injectable and Self-Expandable Shape Memory Polymer Nanosheets”, The International Conference on Materials for Advanced Technologies (ICMAT) 2019, Singapore, June 23-28, 2019.
  65. Kento Yamagishi, Akihiro Nojiri, Eiji Iwase and Michinao Hashimoto, “Syringe-Injectable and Self-Expandable Shape Memory Polymer Ultrathin Films”, 2019 MRS Fall Meeting & Exhibit, Boston, United States, December 1-6, 2019.
  66. Kenneth Tracy, Sachin Sean Gupta, Loo Yi Ning Stella, So Jing Wen, Abhipsa Pal, Thomas Wortmann, Robert Bamford, “Tensile Configurations – Exploring Spatial Membrane Tensegrity Shell Structures”, ACADIA 2019 – The Association for Computer Aided Design in Architecture, Texas, United States, October 24-26, 2019.
  67. Nahaad Vaheed, Felix Raspall, Rajkumar Velu, Chadurvedi Venkatesan, “Toolpath strategy and generation for robotic fibre placement on curved surfaces”, 22nd International Conference on Composite Materials (ICCM22), August 11-16, 2019, Melbourne, Australia.

2018

  1. Binh-Son Hua, Adrien Gruson, Derek Nowrouzezahrai and Toshiya Hachisuka, “Gradient-Domain Photon Density Estimation”, Eurographics 2017 Conference, April 24 – 28, 2017, Lyon, France.
  2. Lu, H. Chen, S.K. Yeung, Z. Deng, W. Chen, “Unsupervised Articulated Skeleton Extraction from Point Set Sequences Captured by a Single Depth Camera”, The 32nd AAAI Conference on Artificial Intelligence (AAAI-2018), February 2 – 8, 2018, New Orleans, Lousiana, USA.
  3. Shiya Li, Ahmad Serjouei, Biao Zhang, Amol A. Pawar, Liraz Larush, Shlomo Magdassi, Qi Ge, “Highly Stretchable Hydrogels for Digital Light Processing Based High Resolution 3D Printing”, Advanced Materials World Congress (AMWC), February 4 – 8, 2018, Singapore.
  4. Biao Zhang, Martin Dunn and Qi Ge, “Reprocessable thermosets for three-dimension printing”, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring Conference, March 4 – 8, 2018, Denver, Colorado USA.
  5. Shiya Li, Ahmad Serjouei, Biao Zhang, Amol A. Pawar, Liraz Larush, Shlomo Magdassi, Qi Ge, “Highly stretchable hydrogels for digital light processing based high resolution 3D printing”, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring Conference, March 4 – 8, 2018, Denver, Colorado USA.
  6. Rosen, D.W., “Polymers in Additive Manufacturing: Survey and Opportunities,” TMS Conference, March 11-15, 2018, Phoenix, Arizona, USA.
  7. Oliver Weeger, Amir Hosein Sakhaei, Ying Yi Tan, Yu Han Quek, Sawako Kaijima, Sai-Kit Yeung, Martin L. Dunn, “Towards a digital workflow for design and fabrication of 3D knitted textiles: nonlinear multi-scale modelling, simulation and validation” 8th World Conference on 3D Fabrics and Their Applications, March 28 -29, 2018, Manchester, UK.
  8. Yingsi Wu,Xinyu Zhao, and Mei Chee Tan, “Controlling Surface and Dispersion Characteristics of Ag Particle Based Inks to Improve Electrical and Sensing Properties of Conductive Composites”, 2018 MRS Spring Meeting, April 2 ‐ April 6, 2018 Phoenix Convention Center, Phoenix, Arizona.
  9. Agarwal, V. Viswanathan, S. Maheshwari and P. Valdivia y Alvarado, “Effects of Material Properties on Soft Gripper Grasping Forces”, 2018 IEEE International Conference on Soft Robotics (RoboSoft),April 23 – 29, 2018, Livorno, Italy.
  10. Ying Yi Tan, Tat Lin Lee and Sawako Kajima, “The Flexible Textile Mesh – manufacture of curved perfoated cladding screens”, International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), May 17 – 19, 2018, Beijing, China.
  11. Priscilla Teh, Chi Kwan Leung, Cheryl Ng, Felix Amtsberg and Stylianos Dritsas, “Robotic Fabrication of Lightweight Surface Assemblies – By Parametric Delamination Of Polyurethane-Fabric Components”, International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), May 17 – 19, 2018, Beijing, China.
  12. Ryan Wei Shen Chee, Wei Lin Tan, Wei Hern Goh, Felix Amtsberg and Stylianos Dritsas, “Locally Differentiated Concrete by Digitally Controlled Injection”, International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), May 17 – 19, 2018, Beijing, China.
  13. Trevor Ryan Patt, “Adaptive Free-Form Lamella Structures”, International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), May 17 – 19, 2018, Beijing, China.
  14. Lei, O. Faust, D. W. Rosen and N. Sherkat , “Uncovering Design Topics by Visualizing And Interpreting Keyword Data”, 15th International Design Conference – Design 2018, May 21 – 24, 2018, Dubrovnik – Croatia.
  15. Zhi Hua Ren, Wen Chuan Mu and Shao Ying Huang, “Optimization of Permanent Magnet Array for a Portable MR Imager”, Joint Annual Meeting ISMRM-ESMRMB 2018, Jun 16 – 21, 2018, Paris, France.
  16. Zhi Hua Ren and Shao Ying Huang, “The Design of A Short Solenoid with Homogeneous B1 for A Low-field Portable MRI Scanner Using Genetic Algorithm”, Joint Annual Meeting ISMRM-ESMRMB 2018, Jun 16 – 21, 2018, Paris, France.
  17. Daniel Teo Guangwei, Boxin Shi, Yinqiang Zheng and Sai-Kit Yeung, “Self-calibrating Polarising Radiometric Calibration”, IEEE Conference on Computer Vision and Pattern Recognition (CVPR), June 18 – 22, 2018, Salt City Lake, USA.
  18. Boddeti, K. Maute, M.L. Dunn, “Multiscale Topology Optimization and Fabrication Framework for Laminated Composites”, 2018 Annual International Freeform Fabrication Symposium (SFF 2018), August 13-15, 2018, Austin, Texas, USA.
  19. Boddeti, O. Weeger, P. Valdivia y Alvarado, M.L. Dunn, “Optimal Design of Bio-inspired Multi-material Soft Robots”, 13th World Congress on Computational Mechanics (WCCM XIII & PANACM II), July 22-27, 2018, New York, USA.
  20. Rosen, D.W., “Advances in Design for Additive Manufacturing,” Keynote Presentations at International Conference on Engineering Innovation, Bangkok, Thailand, July 5-6, 2018.
  21. Weeger, N. Boddeti, S.-K. Yeung, D.W. Rosen, M.L. Dunn, “Design and optimization of spatially-varying, multi-material 3D printed soft lattice structures”, 2018 Annual International Freeform Fabrication Symposium (SFF 2018), August 13-15, 2018, Austin, Texas, USA.
  22. Weeger, S.-K. Yeung, D.W. Rosen, M.L. Dunn. “Isogeometric design optimization of nonlinear 3D beam structures for multi-material 3D printing and soft lattices”, 13th World Congress on Computational Mechanics (WCCM XIII & PANACM II), July 22-27, 2018, New York, USA.
  23. Weeger, S.-K. Yeung, M.L. Dunn, “Isogeometric design and optimization of spatially varying, multi-material 3D printed rod structures”, 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), May 14-17, 2018, Singapore.
  24. Rosen, D.W., “Standards Developments in Additive Manufacturing,” Keynote Presentations at 3rd International Conference on Progress in Additive Manufacturing Conference, May 16, 2018, Singapore.
  25. Xiong, P. L. T. Duong, N. Raghavan, D. W. Rosen, “ A Rapid Design Exploration Framework Under Additive Manufacturing Process Uncertainty”, 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), May 14-17, 2018, Singapore.
  26. Park, S.- I., Watanabe, N., & Rosen, D. W., “Tensile Failure Prediction For Cellular Lattice Structure Fabricated By Materials Extrusion Using Cohesive Zone Model”, 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), May 14-17, 2018, Singapore.
  27. Kim, S., Rosen, D.W., “Linking Part Design to Process Planning by Design for Additive Manufacturing Ontology,” 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), May 14-17, 2018, Singapore.
  28. Rosen, D.W., “Manufacturing Elements to Support Design for Additive Manufacturing,” 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), May 14-17, 2018, Singapore.
  29. Xian, Y., Rosen, D.W., “Morphable Components Topology Optimization for Additive Manufacturing”, 2018 Annual International Freeform Fabrication Symposium (SFF 2018), August 13-15, 2018, Austin, Texas, USA.
  30. Ko, H., Witherell, P., Rosen, D., Kim, S., “A Methodology for Form Feature-oriented Modular Design Rule Representation and Ontology Development for Additive Manufacturing”, 2018 Annual International Freeform Fabrication Symposium (SFF 2018), August 13-15, 2018, Austin, Texas, USA.
  31. Emami, M.M., Rosen, D.W., “An Improved Vat Photopolymerization Cure Model Demonstrates Photobleaching Effects”, 2018 Annual International Freeform Fabrication Symposium (SFF 2018), August 13-15, 2018, Austin, Texas, USA.
  32. Kavin Kowsari, Qi (Kevin) Ge, “High-efficiency, High-resolution Multimaterial Fabrication for Digital Light Processing-based Three-dimensional Printing”, 2018 Annual International Freeform Fabrication Symposium (SFF 2018), August 13-15, 2018, Austin, Texas, USA.
  33. Kavin Kowsari, Qi (Kevin) Ge, “Photopolymer Formulation to Maximize the Resolution and Quality of Microarchitectures Fabricated Using Digital Light Processing-based 3D Printing”, 2018 Annual International Freeform Fabrication Symposium (SFF 2018), August 13-15, 2018, Austin, Texas, USA.
  34. Rajkumar Velu, Nahaad Vaheed, Felix Raspall, “Design and Robotic Fabrication of 3D Printed Moulds for Composites”, 2018 Annual International Freeform Fabrication Symposium (SFF 2018), August 13-15, 2018, Austin, Texas, USA.
  35. Hong Yee Low, Jumiati Wu, Wei Li Lee, “Hybrid Printing and Nanoimprint Fabrication of Functional Surfaces”, 2018 Annual International Freeform Fabrication Symposium (SFF 2018), August 13-15, 2018, Austin, Texas, USA.
  36. Apoorv Vaish, Shien Yang Lee, Pablo Valdivia y Alvarado, “Viscosity Control of Pseudo-plastic Polymer Mixtures for Applications in Additive Manufacturing”, 2018 Annual International Freeform Fabrication Symposium (SFF 2018), August 13-15, 2018, Austin, Texas, USA.
  37. Mei Chee Tan, Yingsi Wu, Zhaomin Wang, Xinyu Zhao, “Controlling Dispersion Characteristics of Ag-PDMS Conductive Composites”, 2018 Annual International Freeform Fabrication Symposium (SFF 2018), August 13-15, 2018, Austin, Texas, USA.
  38. Yadunund Vijay, Naresh D. Sanandiya, Stylianos Dritsas, Javier G. Fernandez, “Control of Process Settings for Large-Scale Additive Manufacturing with Sustainable Natural Composites”, ASME 2018 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2018, August 26-29, 2018, Quebec, Canada.
  39. Kim, S., Ko, H., Witherell, P., Rosen, D.W., “A Design for additive manufacturing ontology to support manufacturability analysis,” ASME 2018 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2018, August 26-29, 2018, Quebec, Canada.
  40. Stylianos Dritsas, Yadunund Vijay, Marina Dimopoulou, Naresh Sanadiya and Javier G. Fernandez, “An Additive and Subtractive Process for Manufacturing with Natural Composites”, ROB|ARCH 2018, September 12–14, 2018, Zurich, Switzerland.
  41. Ryan Chee Wei Shen, Tan Wei Lin, Goh Wei Hern, Felix Amtsberg4and Stylianos Dritsas, “Concrete Fabrication by Digitally Controlled Injection”, ROB|ARCH 2018, September 12–14, 2018, Zurich, Switzerland.

2017

  1. Sawako Kaijima, Ying Yi Tan and Tat Lin Lee, 2017, “Functionally Graded Architectural Detailing Using Mulit-Material Additive Manufacturing”, International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), April 5-8, 2017, Suzhou, China.
  2. Chen, Y., Xia, T., Koh, J.L., Goh, Y.Q., Dritsas, S., “Form-Finding with Robotics”, International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), April 5-8, 2017, Suzhou, China.
  3. Sia, C.K., Tan, R., Tee, Y.K., Koh, K., Dritsas, S., “Developing Composite Wood for 3D Printing”, International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), April 5-8, 2017, Suzhou, China.
  4. Jason Lim, Jefferey Huang, “Upcycling Offcuts – Assembling furniture out of high-grade timber waste”, International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), April 5-8, 2017, Suzhou, China.
  5. Binh-Son Hua, Quang-Trung Truong, Minh-Khoi Tran, Quang-Hieu Pham, Asako Kanezaki, Tang Lee, HungYueh Chiang, Winston Hsu, Bo Li, Yijuan Lu, Henry Johan, Shoki Tashiro, Masaki Aono, Minh-Triet Tran, Viet-Khoi Pham, Hai-Dang Nguyen, Vinh-Tiep Nguyen, Quang-Thang Tran, Thuyen V. Phan, Bao Truong, Minh N. Do, Anh-Duc Duong, Lap-Fai Yu, Duc Thanh Nguyen, and Sai-Kit Yeung, “RGB-D to CAD Retrieval with ObjectNN Dataset”, Eurographics 2017 Conference, April 24 – 28, 2017, Lyon, France.
  6. Ye Wang; Dezhi Kong; Hui Ying Yang, “Various WS2/carbonaceous Hierarchical Architectures for High-performance Rechargeable Lithium-ion and Sodium-ion Batteries”, E-MRS 2017 Spring Meeting, May 22 – 26, 2017, Strasbourg, France. 
  7. Liu Hailong, “Chalcogenide Color-Changing Plasmonic Pixels”, The 8th International Conference on Surface Plasmon Photonics (SPP8), May 22 – 26, 2017, Taipei, Taiwan. 
  8. Kevin Lim and Joel Yang, “Direct laser writing of color transmission holograms”, The 61st International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication EIPBN 2017, May 30 – June 2, 2017, Orlando, FL, USA.
  9. Patel, Sayjel Vijay; Mignone, Paul John; Tam, Mark Kam-Ming; Rosen, David, 2017, “Reverse Natures: Design Synthesis of Texture-based Metamaterials (TBMs)”, International Conference on Engineering Design (ICED), Design Society, August 21 – 25, 2017, Vancouver, Canada.
  10. Wang Ye, “Printed electronic devices with inorganic materials”, International Conference on Energy, Materials and Photonics 2017 (EMP17), June, 24 – 26, 2017, Shenzhen, China.
  11. Weeger, N. Boddeti, Y.J. Teoh, B. Narayanan, S.-K. Yeung, S. Kaijima, M.L. Dunn, “Digital Design and Manufacture of Soft Lattice Structures”, 28th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (SFF 2017), August 7–9, 2017 Austin, TX, USA.
  12. Ding, C. Yuan, O. Weeger, M.L. Dunn, H.J. Qi, “A Direct 4D Printing Method using Multimaterial 3D Printing.”, 28th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (SFF 2017), August 7–9, 2017, Austin, TX, USA.
  13. Wang Dong, “Fabrication and Design of Multilayer Anisotropic Composites”, The 21st International Conference on Composites Materials, August 19 – 26, 2017, Xi’an, China.
  14. Patel, Sayjel Vijay; Mignone, Paul John; Tam, Mark Kam-Ming; Rosen, David, 2017, “Reverse Natures: Design Synthesis of Texture-based Metamaterials (TBMs)”, International Conference on Engineering Design (ICED), Design Society, August 21 – 25, 2017, Vancouver, Canada.
  15. Dritsas, S., Chen, L., Sass, L, “Small 3D Printers / Large Scale Artifacts”, International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), April 5-8, 2017, Suzhou, China. (Best Presentation Award).
  16. Islam, A. Takano, M. Hashimoto, 2017, “Multilayer Fluidic Elastomeric Actuators for Controlling Actuation of Soft Constructs”, International Conference on Robotics and Automation (ICRA), May 29 – June 3, 2017, Singapore.
  17. HASHIMOTO, M.; GOH, W., 2017, “Fabrication of 3D microfluidic channels using 3D-printed, water soluble sacrificial mold”, 7th International Multidisciplinary Conference on Optofluidics, July 25 – 28, 2017, Singapore.
  18. Valdivia y Alvarado, 2017, “Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing”, International Conference on Materials for Advanced Technologies (ICMAT), June 18 -23, 2017, Singapore.
  19. Narasimha Boddeti, Zhen Ding, Sawako Kaijima, Kurt Maute, Martin Dunn, 2017, “Multiscale Voxel-Based Design and Additive Manufacture of Composite Components”, Solid Freeform Fabrication Symposium 2017, August 9, 2017, University of Texas, Austin, US.
  20. Noah Duncan, Lap-Fai Yu, Sai-Kit Yeung, Demetri Terzopoulos, 2017, “Approximate Dissections”, SIGGRPAHAsia 2017, November 27 – December 1, 2017, Bangkok, Thailand.
  21. Daniel Aliaga, Richard Hao, Lap-Fai Yu, Sai-Kit Yeung, Demetri Terzopoulos, 2017, “Modeling and Remodeling 3D Worlds”, SIGGRPAHAsia 2017, November 27 – December 1, 2017, Bangkok, Thailand.
  22. Duc Thanh Nguyen, Binh-Son Hua, Lap-Fai Yu, Sai-Kit Yeung, 2017, “A Robust 3D-2D Interactive Tool for Scene Segmentation and Annotation”, Pacific Graphics 2017, October 23 – 27, 2017, Taipei, Taiwan.
  23. Zhipeng Mo, Boxin Shi, Sai-Kit Yeung, Yasuyuki Matsushita,2017, “Radiometric Calibration for Internet Photo Collections”, IEEE Conference on Computer Vision and Pattern Recognition (CVPR), July 22 – 26, 2017, Hawaii, USA.
  24. Jiawang Bian, Daniel Lin, Yasuyuki Matsushita, Dinglong Duan, Sai-Kit Yeung, Tan Dat Nguyen, Ming-Ming Cheng, 2017 “GMS: Grid-base Motion Statistics for Fast, Ultra-robust Feature correspondence”, IEEE Conference on Computer Vision and Pattern Recognition (CVPR), July 22 – 26, 2017, Hawaii, USA.
  25. Sai-Kit Yeung, 2017, “Creative AI: Data Guided Approaches in Space Planning”, Future Mobility Symposium 2017 by Future Urban Mobility (FM) IRG of the Singapore–MIT Alliance for Research and Technology (SMART) Center, July 6, 2017, National University of Singapore, Singapore.
  26. Oliver Weeger, Sai-Kit Yeung, Martin L. Dunn, 2017, “An Isogeometric Analysis Framework for Optimization Of Functional Rod Structures In Additive Manufacturing Applications”, 5th International Conference on Isogeometric Analysis (IGA 2017), September 11-13, 2017, Pavia, Italy.
  27. Qi Ge, 2017, “Functional Additive Manufacturing with Smart Materials”, World Congress of Smart Materials (WCSM) 2017, March 16 – 18, 2017, Bangkok, Thailand.
  28. Qi Ge, 2017, “Functional Additive Manufacturing with Soft Materials”, 9th International Conference on Materials for Advanced Technologies (ICMAT) 2017, June 18 – 23, 2017, Singapore.
  29. Ge Qi, 2017, “Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing”, IEEE International Conference of Robotics and Automation, May 29, 2017, Singapore.
  30. Valdivia y Alvarado, 2017, “Direct Fabrication of Soft Robot Bodies as Functionalized Soft Composite Structures” IEEE International Conference of Robotics and Automation, May 29, 2017, Singapore.
  31. Valdivia y Alvarado, 2017, “Opportunities and challenges for small-scale soft robots and potential applications to bio-hybrid machines” IEEE International Conference of Robotics and Automation, May 29, 2017, Singapore.
  32. Fries, P. Valdivia y Alvarado, 2017, “Whisker-like Sensors with Soft Resistive Follicles”, IEEE International Conference on Robotics and Biomimetics (ROBIO), December 5 – 8, 2017, Macau, China.
  33. WH Goh, M Hashimoto, 2017, “Sacrificial Molding to Fabricate Multilayer Vasculature in Hydrogel”, 3rd International Symposium on Mechanobiology, December 11 – 14, 2017, Singapore.
  34. Y Wu, MC Tan, 2017, “Fabrication and Interfacial Characteristics of Conductive Composites using Surface-Modified Ag Particles”, 9th International Conference on Materials for Advanced Technologies (ICMAT) 2017, June 18 – 23, 2017, Singapore.
  35. Sayjel Patel, Mark Tam, Sanjay Pushparajan, Paul Mignone, 2017, “3D Sampling Textures for Creative Design and Manufacturing”, Conference of Association for Computer Aided Design in Architecture (ACADIA) 2017, November 2 – 5, 2017, Massachusetts Institute of Technology, US.
  36. Wei Li Lee, Jumiati Wu, Hong Yee Low, 2017, “Nanoinjection Molding of High Resolution Surface Patterns on 3D Objects”, 30th  International Microprocesses and Nanotechnology Conference (MNC 2017), November 6 – 9, 2017, Jeju, South Korea.
  37. Jumiati Wu and Hong Yee Low, 2017, “Effects of Combined Macroscopic Curvature and Nanoimprinted Surface Patterns on Polymer Surface Wettability”, Nanoimprint and Nanoprint Technology, November 8 – 10, 2017, Gyeongnam, Korea.
  38. Trisno, J.; Lu, L.; Dong, Z.; Ho, J. F.; Zhang, Y. W.; Yang, J. K. W., 2017, “Metal Patterning and Grain Boundary Engineering by Template Assisted Metal Dewetting (TeAMeD)”, 61st International Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN) Conference, May 30 – June 2, 2017, Orlando, Florida, US.
  39. Trisno, J.; Lu, L.; Dong, Z.; Ho, J. F.; Zhang, Y. W.; Yang, J. K. W., 2017, “Plasmonic Color in The SWIR Spectrum with Hole Arrays Fabricated by Template Assisted Metal Dewetting”, 8th  International Conference on Surface Plasmon Photonics (SPP8), May 22 – 26 , 2017, Academia Sinica, Taipei, Taiwan.
  40. Rosen, D.W., 2017, “Research in the Digital Manufacturing and Design Centre at SUTD,” 2nd Shanghai Shanghai Additive Manufacturing Association (SAMA) International Forum and the 3rd 3D Printing Industry Conference, October 20 – 22, 2017, Shanghai, China.
  41. Rosen, D.W., “Impacts of 3D Printing on Industry 4.0 – and Vice Versa,” 5th Asia-Korea Conference on Science & Technology, Singapore, November 16 – 18, 2017, Singapore.
  42. Rosen, D.W., Na Ayutthaya, D.H., Koomsap, P., “Additive and digital manufacturing design tools: an application of product-service system design,” Asia-Design Engineering Workshop, December 11 – 12, 2017, Seoul, South Korea.

2016

  1. Oliver Weeger, Martin L. Dunn, Sai-Kit Yeung, “Design Optimization of Active Multi-Material  3D Printed Rod Structures”, 12th World Congress on Computational Mechanics (WCCM XII), Seoul, Korea, July 2016.
  2. Dritsas, S., “An Advanced Parametric Modeling Library for Architectural and Engineering Design”, 21st Annual Conference on Computer-Aided Architecture Design Research in Asia, Australia, April 2016.
  3. Youngjin Chae, Hyowon Lee, Poon King Wang, “Flexible Solar Textiles with Style for Future Smart Clothing System”, Fiber Society Spring 2016 Conference, France, May 2016.
  4. Joel Yang, “Nanostructured Color Elements and Antennas”, Plasmonics & Nanophotonics Gordon Research Conference, Maine, July 2016.
  5. Noah Duncan, Lap-Fai Yu, Sai-Kit Yeung, “Interchangeable Components for Hands-On Assembly Based Modelling”, SIGGRAPH Asia, Boston, July 2016.
  6. Tian Feng, Lap-Fai Yu, Sai-Kit Yeung, KangKang Yin, Kun Zhou, “Crowd-driven Mid-scale Layout Design”, SIGGRAPH Asia, Boston, July 2016.
  7. Sayjel Patel, KamMing Tam and Caitlin Mueller, 2016, “3DDJ: An Analytical and Generative Design System for Synthesizing High Performance Textures from 3D Scans“, Design Computing and Cognition DCC’16.
  8. Boxin Shi, Zhe Wu, Zhipeng Mo, Dinglong Duan, Sai-Kit Yeung. Ping Tan, 2016, “A Benchmark Dataset and Evaluation for Non-Lambertian and Uncalibrated Photometric Stereo”. IEEE Conference on Computer Vision and Pattern Recognition (CVPR).
  9. Duc Thanh Nguyen, Binh-Son Hua, Minh-Khoi Tran, Quang-Hieu Pham, Sai-Kit Yeung, 2016, “A Field Model for Repairing 3D Shapes”, IEEE Conference on Computer Vision and Pattern Recognition (CVPR), 2016. Spotlight presentation.
  10. Kaijima, Z. Conti, M.L. Dunn, 2016 “A Design Oriented Computational Method to Fabricate Functionally Graded Design from Solid Finite Element Analysis Results”, IASS 2016, Spatial Structures in the 21st Century.
  11. Viswanathan V, Jiang H, Ng JHA, Ng GH, Ng ZK, Teo HEK, Valdivia y Alvarado P., “Adaptation of Batoid-like Propulsion to AUVs and its Performance Analysis”, Intelligent Systems and Robotics, 2016 October 6-7.
  12. Sawako Kajima, Zack XUEREB, Martin L. Dunn, “A Design Oriented Workflow to Prototype Functionally Graded Designs based on Solid Finite Element Analysis”, International Association for Shell and Spatial Structures (IASS) 2016, Sep. 26-30, 2016, Japan.
  13. Binh-Son Hua, Quang-Hieu Pham, Duc Thanh Nguyen, Minh-Khoi Tran, Lap-Fai Yu, Sai-Kit Yeung, “SceneNN: a Scene Meshes Dataset with aNNotations”, International Conference on 3D Vision (3DV) 2016, Oct 25-28, 2016, USA.
  14. Duc Thanh Nguyen, Binh-Son Hua, Minh-Khoi Tran,  Quang-Hieu Pham, Sai-Kit Yeung, “A Field Model for Repairing 3D Shapes”, IEEE Conference on Computer Vision and Pattern Recognition (CVPR ), June 26-July 1, 2016, USA.
  15. Meena Periya Samy, Shaohui Foong, Gim Song Soh, Kang Shua Yeo, “Automatic Optical & Laser-based Defect Detection and Classification in Brick Masonry Walls”, IEEE TENCON Conference 2016, 22-25 November 2016, USA.
  16. Hong Yee Low, Su-hui Lim, Wui Siew Tan, “Nanoimprinting on Curve Substrate via an Elastic Bilayer Mold”, Nanoimprint Industrial Day, March 2016, Vienna.
  17. Jumiati Wu and Hong Yee Low, “Direct Nanoimprinting on Curved Objects”, Nanoimprint and Nanoprint Technology, INL – International Iberian Nanotechnology Laboratory, 26-28 September 2016, Braga, Portugal.
  18. Dritsas, S., “An Advanced Parametric Modeling Library for Architectural and Engineering Design”, Computer Aided Architectural Design in Asia, 2016, Australia.
  19. Tan R. and Dritsas, S., “Clay Robotics: Tool making and sculpting of clay with a six-axis robot”, Computer Aided Architectural Design in Asia, CAADRIA, 2016, Australia.
  20. Wang, S., Dritsas, S., Morel, P., Ho, K., “Clay Robotics: A Hybrid 3D Printing Casting Process”, International Conference on Sustainable Smart Manufacturing, 2016, Portugal.

2015

  1. Noah Duncan, Lap-Fai Yu, Sai-Kit Yeung, Demetri Terzopoulos, 2015, “Zoomorphic Design”, SIGGRAPH, New York, Aug 2015.
  2. Lai CF, Yeung SK, Yan X, Fu CW, Tang CK., 2015 “3-D Navigation on Impossible Figures via Dynamically Reconfigurable Maze” IEEE Transactions on Visualization and Computer Graphics, Los Angeles, Dec 2015.
  3. Lap-Fai Yu, Noah Duncan, Sai-Kit Yeung, 2015, “Fill and Transfer: A Simple Physics-based Approach for Containability Reasoning”, IEEE International Conference on Computer Vision (ICCV 2015), Santiago, Chile, Dec 2015.
  4. Duc Thanh Nguyen, Minh-Khoi Tran, Sai-Kit Yeung, 2015, “An MRF-poselets Model for Detecting Highly Articulated Human”, IEEE International Conference on Computer Vision (ICCV 2015), Santiago, Chile, Dec 2015.
  5. Achuta Kadambi, Vage Taamazyan, Boxin Shi, Ramesh Raskar, 2015 “Polarized 3D: High-Quality Depth Sensing with Polarization Cues”, IEEE International Conference on Computer Vision (ICCV 2015), Santiago, Chile, Dec 2015.
  6. Jian Wang, Yasuyuki Matsushita, Boxin Shi, Aswin C. Sankaranarayanan, 2015, “Photometric Stereo with Small Angular Variations”, IEEE International Conference on Computer Vision (ICCV 2015), Santiago, Chile, Dec 2015.
  7. Qi Ge, Yiqi Mao, Kai Yu, Martin L. Dunn, and H. Jerry Qi, 2015, “Active Composites and 4D Printing”, 20th International Conference on Composite Materials, Copenhagen, Denmark, July 2015.
  8. Isakov, M, Qi, H. J., and Dunn, M. L., “Additive Manufacturing of High Performance Self-Actuating Structures,” ASME International Mechanical Engineering Conference and Exhibition, Houston, TX, Nov. 2015.
  9. Wu, J., Chau, Y., Zhen, D., Dunn, M. L., and Qi, H. J., “Multi-shape memory polymer composites by 4D printing,” ASME International Mechanical Engineering Conference and Exhibition, Houston, TX, Nov. 2015.
  10. Ge, Q., Lee, H., Dunn, M. L., and Fang, N., “Three Dimension Printing of Shape Memory Structures on Projection Micro-Stereolithography,” ASME International Mechanical Engineering Conference and Exhibition, Houston, TX, Nov. 2015.
  11. Dunn, M. L., Qi, H. J., Ge, Q., Zhen, D., and Maute, K., “4D Printing of Active Polymer Materials and Components,” 2016, ASME International Mechanical Engineering Conference and Exhibition (Keynote), Houston, TX, Nov. 2015.
  12. Wang Y. et al. ‘3D Printed Lithium-ion Batteries with Various MoS2/carbonaceous Hierarchical Architectures’ MRS fall 2015, Nov 29 – Dec 4, Boston, US (Best poster nominee)
© 2024. SUTD Digital Manufacturing and Design (DManD Centre). All Rights Reserved.
Go to Top